mill
BED TYPE PRECISION MILLING MACHINE FM-610/610F/610G
| 分享到： |  |
|
MODEL |
FM-610 |
FM-610F |
FM-610G |
TABLE |
|||
|
Working surface |
2450 x 580mm (96-7/16"x22-13/16") |
||
|
T-slot (size x number x pitch) |
18mmx4x70mm (0.708"x4x2.755") |
||
|
Max. table load |
1500kgs (3315 lbs) |
||
TRAVEL |
|||
|
Longitudinal travel |
2000mm (78-3/4") |
||
|
Cross travel (Y axis) |
650mm (25-5/8") |
||
|
Vertical travel (Z axis) |
700mm (27-9/16") or 800/900/1000 mm (opt.) |
600mm (23-5/8") or 700/800/900mm (opt.) | |
| Distance from spindle end to table | 100~800/900/1000/ 1100mm |
90~690/790/890/ 990mm |
120~720/820/920/ 1020mm |
|
Distance from spindle center to cloumn |
650mm (25-9/16") | 610mm (24") | |
SPINDLE |
|||
|
Spindle nose taper |
NT#40 / BT#40 | NT#50 / BT#50 | |
|
Spindle speeds |
Inverter operated vari 85~3600r.p.m. |
Inverter operated vari 60~3000r.p.m. (3 steps) |
6 steps 125~1100r.p.m. (60HZ) or 104~1400r.p.m. (50HZ) |
| Quill dia | Ø110mm (4-5/16") | Ø128.57mm (5") | |
FEED |
|||
|
Cutting feed rate X,Y,Z axes |
vari 10~3000 mm/min. |
||
|
Rapid traverse X,Y,Z axes |
vari 4800 mm/min. |
||
MOTOR |
|||
|
Spindle drive motor |
7-1/2HP |
10HP/ 4P or 15HP/4P (opt.) |
10HP 2P/4P |
|
X,Y,Z axes motor |
4.5Nm | ||
|
Coolant pump |
1/8HP | ||
DIMENSION |
|||
|
Machine weight (net) |
5700kgs (12597 lbs) |
6000kgs (13260 lbs) | |
- The manufacturer reserves the right to modify the design, specifications, mechanisms…etc. to improve the performance of the machine without prior notice. All the specifications shown above are just for reference
