MODEL
|
CW-30
|
MACHINE UNIT SPECIFICATION
|
| Machining method |
|
Submerge / Flushing |
| Max. workpiece size (W x D x H) |
mm |
780x500x250 |
| Max. workpiece weight |
kg |
500 |
| X, Y axes travel |
mm |
400x300 |
| Z axis travel |
mm |
250 |
| U, V axes travel |
mm |
±50x±50 |
| X-Y axes feed rate |
mm/min |
Max. 900 |
| Best surface roughness |
µm |
Ra 0.65 |
| Drive motor (X, Y, U, V) |
|
AC Servo Motor |
| Wire diameter (standard) |
mm |
Ø0.25 (Ø0.15-Ø0.3) |
| Wire feeding speed |
m/min |
0-15 |
| Wire tension |
gf |
200-2500 |
| Max. taper angle |
degree |
±15°/80 |
| Max. wire bobbin weight |
kg |
6 |
| Outside dimensions (W x D x H) |
mm |
(S)970x719x510
(F)1040x719x450 |
| Machine weight |
kg |
2200 |
WORKING FLUID SUPPLY UNIT
|
| Tank capacity (liter) |
l |
690 / 420 |
| Filter element |
|
Paper filters |
| Ion exchange resin |
l |
15l |
| Conductivity control system |
|
Standard |
| Fluid temperature control (With coolant) |
|
Auto. (optional) |
| Outside dimensions (W x H x D) |
mm |
(S)1100x1570x1290
(F)950x1400x1290 |
| Net weight (without water) |
kg |
250 |
POWER SUPPLY UNIT
|
| Circuit system |
|
Power MOS transistor |
| Max. outpt current |
A |
25 |
| Voltage select |
V |
145 |
| IP select |
|
10 |
| Off time select |
|
50 |
CNC UNIT
|
| I/O device |
|
Keyboard, RS-232C, CF CARD |
| Display type |
|
15"LCD-TFT |
| Control system |
|
32 bit, 1-CPU, closed loop software servo system |
| Control axis |
|
X, Y, U, V, Z |
| Min. setting unit |
mm |
0.001 |
| Max. command value |
mm |
±9999.999 |
| Interpolation |
|
Linear / Circular |
| Command system |
|
Abs. / Incl. |
| Machining feed control |
|
Servo / Const. Feed |
| Scaling |
|
0.001~9999.999 |
| Auto 2nd cut system |
|
Re-trace and auto changed machining data |
| Machining condition memory |
|
0-9999 |
| Outside dimensions (W x H x D) |
mm |
600x870x1850 |
| Total AC power input |
KVA |
3Ø220V ±10% / 13KVA |
